Description
Osmo Uviwax® with UV protection is a clear or white, satin wax-like finish for interior use. The UV protection noticeably reduces yellowing, so light wood keeps its natural tone for longer. The finished surface repels dirt and water and is tough and hard-wearing. The microporous finish lets the wood breathe and reduces swelling and shrinkage. Once dry it is safe for people, animals and plants, complies with the toy standard EN 71.3 and is saliva- and sweat-resistant (DIN 53160).
Where to use
As a stand-alone finish on wood panelling and ceilings, as well as cabinets and doors. Also suitable for touching up surfaces factory-finished with Uviwax (cut edges, trims and similar).
Shades and can sizes
- 7200 Clear satin matt – 0.125 / 0.75 / 2.5 / 25 L
- 7266 White – 0.125 / 0.75 / 2.5 / 25 L
- 7256 White transparent – 0.75 / 2.5 L
1 litre covers approx. 16 m² per coat.
Application
Apply a thin, even coat to clean, dry, untreated wood along the grain with an Osmo Aqua brush or by spraying. Allow 3–4 hours to dry with good ventilation. If required, lightly sand with fine paper (P360) and apply a second thin coat. On resinous woods (e.g. larch) clean the surface first with Osmo Brush Cleaner 8000. For renovation, one coat on a cleaned surface is sufficient.
Safety
Keep out of the reach of children. Water-based product – clean tools immediately after use with soap and water. Protect from frost, store at 5–35 °C.
Documents
- Osmo Uviwax® – product information (PDF, in Estonian)
- Osmo Uviwax® – safety data sheet (PDF, in Estonian)
Documents in other languages are available on request.
