Description
Osmo Water-Based Wax for interiors gives a dirt- and water-repellent, tough and hard-wearing surface. Easy to apply – no primer or sanding between coats, saving time and money. The microporous finish lets the wood breathe and reduces swelling and shrinkage. Once dry it is safe for people, animals and plants, complies with the toy standard EN 71.3 and is saliva- and sweat-resistant (DIN 53160).
Where to use
For protecting and decorating wood: wall and ceiling panelling, beams, furniture, doors and children’s toys. Also suitable for renovating and repairing ceiling panels factory-finished with Osmo wax 7393 or 7394.
Shades and can sizes
- 7393 White transparent – the wood grain remains visible
- 7394 White opaque
Sizes 0.125 L, 0.75 L and 2.5 L. 1 litre covers approx. 16 m² per coat.
Application
The surface must be clean and dry (max. 18% moisture, at least +10 °C). Stir thoroughly, do not thin. Apply a thin, even coat along the grain with an Osmo Aqua brush or microfibre roller. Allow 3–4 hours to dry with good ventilation, lightly sand if required (P360) and apply a second thin coat. For renovation, one coat is sufficient.
Safety
Keep out of the reach of children. Water-based product – clean tools immediately after use with soap and water. Protect from frost, store at 5–35 °C.
Documents
- Osmo Water-Based Wax – product information (PDF, in Estonian)
- Osmo Water-Based Wax – safety data sheet (PDF, in Estonian)
Documents in other languages are available on request.
