Description
Osmo Polyx®-Oil Original is a clear hardwax-oil for finishing wooden floors, stairs, furniture and worktops. Based on natural plant oils and waxes, Osmo Polyx-Oil penetrates the wood, protects it from within and leaves a thin, durable wax layer on the surface. The wood can breathe – the finish does not crack, flake, peel or blister.
The treated surface repels water and dirt and resists wine, coffee, tea, juice and milk stains. An oiled floor can be repaired locally: simply clean the area and apply a fresh coat – no sanding or stripping of the old finish is needed. Once dry, the finish complies with the toy safety standard EN 71.3 and is resistant to saliva and perspiration (DIN 53160).
Where to use Osmo Polyx-Oil Original
- solid wood floors, floorboards, parquet and mosaic parquet
- OSB boards and cork floors
- stairs, furniture and worktops
- terracotta, stone and other unglazed stone surfaces
- also in damp rooms such as kitchens and bathrooms
Sheen levels
- 3011 Glossy – high-gloss finish
- 3032 Satin matt – the most popular, soft satin sheen
- 3062 Matt – natural-looking matt finish
- 3065 Semi-matt – between satin and matt
The product is clear but enhances the natural colour of the wood (slight “wet look”). Colour samples on screen are approximate – we recommend a test application on a small area first.
Coverage and can sizes
1 litre covers approx. 24 m² with one coat. For wooden floors we recommend two thin coats. Available sizes: 0.125 L (sample tin), 0.375 L, 0.75 L, 2.5 L, 10 L and 25 L.
General information
Ingredients
Solids content 50–60%. Base: natural plant oils and waxes (sunflower oil, soya oil, thistle oil, carnauba and candelilla wax), paraffins. Additives: siccatives (drying agents), water-repellent additives. Solvent: odourless, benzene-free white spirit. Complies with EU Directive 2004/42/EC, max. VOC 500 g/l (cat. A/i, 2010).
Technical data
- Density: 0.88–0.95 g/cm³
- Viscosity: 95–240 mPa·s
- Odour: mild, odourless when dry
- Flash point: > 60 °C (DIN EN ISO 2719)
Storage
Keeps for 5 years or longer in a tightly closed container. If frozen, the product returns to its normal consistency after 24–36 hours at room temperature.
Application
Preparation
The wood, cork or chipboard surface must be clean and dry (max. 18% wood moisture). The product is ready to use – do not thin, stir well. Fill small cracks and holes with wood filler. Use only on surfaces that are not at risk of frost. Clean or lightly sand previously treated surfaces and remove old varnish. If needed, sand floors with P120–150 and furniture with P180–240 grit, then remove the dust. The natural character of the wood affects the result, so always test on a small area first, especially with an unfamiliar wood species.
Application
Apply a thin, even coat along the grain to clean, dry wood using an Osmo natural bristle brush, floor brush or microfibre roller. Allow to dry for approx. 8 hours with good ventilation. Then apply a second thin coat in the same way. One coat is enough to refresh previously oiled surfaces.
Cleaning tools
With Osmo Brush Cleaner (8000) or white spirit.
Drying time
Approx. 8–10 hours (23 °C, 50% relative humidity). Lower temperatures or higher humidity extend the drying time. The finish fully cures in 2–3 weeks – do not cover the floor with rugs during this time.
Coverage
1 L ≈ 24 m² with one coat. Consumption depends on the wood species; figures apply to smooth, planed or sanded surfaces.
Tips
Too thick a coat and poor ventilation significantly extend the drying time. For tropical, dense and oily wood species (wenge, merbau, meranti etc.) we recommend Osmo Hardwax-Oil for exotic woods (1101). Cork is more absorbent – apply a particularly thin coat and allow a longer drying time (24 h).
Maintenance
Remove loose dirt and dust with a vacuum cleaner. Wipe with a damp (not wet) mop, adding Osmo Wash and Care (Wisch-Fix 8016) to the water. For deeper cleaning and refreshing use Osmo Liquid Wax Cleaner (3029 or 3087); once dry, the surface can be buffed for a higher sheen.
Safety
Keep out of the reach of children. Avoid contact with eyes and skin; in case of contact with eyes rinse immediately with plenty of water and seek medical advice, taking the container or label with you. Contains 2-butanone oxime, may cause an allergic reaction.
Note – risk of spontaneous combustion: wash oil-soaked cloths immediately or keep them in an airtight container.
The dry finish meets DIN 4102 class B2 (normally flammable). Dispose of liquid waste in accordance with local regulations; empty, dry containers can be recycled.
Documents
- Osmo Polyx-Oil Original – product information (PDF, in Estonian)
- Osmo Polyx-Oil Original – safety data sheet (PDF, in Estonian)
Documents in other languages are available on request.
